3D Filament – 1.75 mm PLAQuantum – Grey – 2kg net

49.99 Iva incl.

PLAQuantum 3D filum filament for FFF/FDm 3D printing .

In stock

SKU: QPL2-9005-1 Category: Tags: , ,

Description

PLAQuantum 3D Filament – 3DFilum – Grey.

PLAQ 3D  filament by 3Dfilum. Hybrid Polylactic Acid Material 80-100 natural – 0-40 addition of acrylic polymers;this material has been studied and tested in the laboratory to achieve greater mechanical characteristics and heat resistance compared to a common PLA , while maintaining the typical PLA ease of printing itself. Once printed, the material transparencies are crystal clear in comparison with the opacity of our PLATech; it does not absorb water and the sealing and melting between the printed layers is excellent; Printed objects with PLAQuantum results to being much durable if made in a common PLA; it does not slob at 50 degrees Celsius, it essentially reach mechanical characteristics  of the ABS; Good elasticity, good resistance to tangential impacts, good compression characteristics and
traction and resistance to chemical agents. This Material is certified for food contact use and only for certain colors (see technical specifications); this material is also recyclable.

Can be used with the following 3D Printers: Sliding 3D, Zortrax, Creality, Mingda, Flashforge, Makerbot, Sharebot, Createbot,Wasp, Prusa, Hephestone, Ewe Industries, 3dprn … AND MANY MORE!

Printing Characteristics

PLAQuantum has an excellent adherence to the printing bed treated with spray lacq o any similar glue products and you can print it with an open printer chamber such as any common PLA ; when printing the material melts evenly, it layer up evenly with strong bonding and does not form filaments in between open objects parts with correct printing speed values. Slowing down the printing speed surfaces can get more transparent and bright at light sources; increasing printing speed makes the object outer surfaces more opaque; the advantage of PLAQuantum is that it is a material with excellent mechanical characteristics at low cost compared to other materials of similar technical characteristics; easy to be printed as much as the PLA (does not need hot printing chamber), it is odorless and does not absorb water. Printing with exact temperatures is important to have the aesthetic effects of this material. It can be finished with very fine-grained sanding tools. You can thread it while keeping a good degree of object infill and glue it with canoacrilate type glues.

Technical data and printing parameters

Color: Grey (RAL 7001)
Net Weight Filament: 2000g
Material: PLAQ – Natural 60-100 Natural Acid Hybrid Material – 0-40 addition of acrylic polymers
Transparency: gloss
Diameter: 1.75 mm
Tolerance of roundness: 0.001mm.
Basic Material Quality: 100 Original Resins
Density: 1.27 g/cm3 (21.5 degrees C).
Spool dimensions (up to 1 kg): 200 x 50 mm.
Internal diameter: 90 mm.
Packaging: vacuum bagged with moisture absorbent and cardboard box.
Nozzle extrusion temperature: 225 degrees – 250 degrees C.
Bed Temperature : 60 – 70 degrees C.
not required or minimal ventilation on the layers during printing operation
Printing bed material: glass, metal, Kapton tape etc.
Recommended temperature: nozzle 224 degrees C at 50 mm/sec; Bed: 60 degrees C
Extruder with or without bowden.
Printing speed (recommended): 40 – 80 mm/s.
Easy PRINTING: ★ ★ ★ ★ ★
Print temperatures may vary depending on the printer you are using and the type of filament color up to 245 degrees C for grey and black colors
Comprehensive technical specific links of the material: https://www.3dfilum.it/3dfilum-filaments-technical-specifications/

Additional information

Weight 3.5 kg
Dimensions 200 × 200 × 100 mm

You may also like…