3D filament in PLAQ – 3Dfilum – Blue.
3D PLAQ filament of 3Dfilum. Hybrid Polylactic Acid Material 80-100 natural – 0-20 addition of acrylic polymers;
has been studied and tested in the laboratory to achieve greater mechanical characteristics and heat resistance of the municipality
PLA while maintaining the ease of printing the PLA itself. Once printed, the material is crystal clear to the light and
respect the opacity of our PLATech; it does not absorb water and the sealing and melting between the printed layers is excellent; have been
withdrawals on the printing of objects more than 30 cm on the side. The artifact made is much more durable
if made in a common PLA especially heat (does not sag at 60 degrees Celsius), it essentially approaches the characteristics
mechanics of the ABS; Good elasticity, good resistance to tangential impacts, good compression characteristics and
traction and resistance to chemical agents. This Material is certified for food use and only for certain colors (see
technical specifications) the material is also recyclable.
Can be used with 3D Printers: Flashforge, Makerbot, Sharebot, Createbot, Wasp, Prusa, Hephestone, Mingda, Ewe
Industries, 3DPRN, 3dpens… AND MANY MORE!
The 3D filament in PLAQ has an excellent adherence to the printed dish treated with lacq any lacq any and you can print it with
open print room such as the pla cold flat with common paper natro (not recommended); when printing the
is good liquidity, spreads evenly and does not form burrs. Slowing down the printing speed
they can make surfaces more transparent or bright; higher speed, on the other hand, makes the object of a more
opaque; the advantage of PLAQuantum is that it is a material with excellent mechanical characteristics and lower cost
compared to other materials of similar technical characteristics; easy to be printed as much as the PLA (does not need a room
hot), is odorless and does not absorb water. Printing with exact temperatures is important to have the aesthetic effect
of this material. It can be finished with very fine-grained sanding tools. You can thread it while keeping a
good degree you fill the object to be made and glue with canoacrilate glue.
Technical data and print parameters
Color: Blue (RAL 5015)
Net Weight Filament: 500g
Material: PLAQ – Natural 60-100 Natural Acid Hybrid Material – 0-40 addition of acrylic polymers
Diameter: 1.75 mm
Tolerance of roundness: 1
Basic Material Quality: 100 Original Resins
Density: 1.27 g/cm3 (21.5 degrees C).
Spool diameter (up to 1 kg): 200 x 50 mm.
Internal coil diameter: 90 mm.
Packaging: vacuum with dryer and cardboard box.
Nozzle extrusion temperature: 225 degrees – 250 degrees C.
Temperature of the pot: 0 – 50 degrees C.
No or minimal ventilation on the layers when printing.
Printing surface material: glass, metal, fiberglass, Kapton tape etc.
Recommended print temperature: nozzle 224 degrees C at 50 mm/sec; 50-C Plate
Extruder with or without bowden.
Printing speed (recommended): 40 – 80 mm/s.
Easy PRINTING: ★ ★ ★ ★ ★
Print temperatures may vary depending on the printer you are using and the type of filament color
Comprehensive technical specific links of the material: https://www.3dfilum.it/3dfilum-filaments-technical-specifications/