1.75 mm PETG-Black

21.90 Incl. Tax

PETG 3dfilum filament spool for 3d printing.

Description

PETG 3dfilum Black 100% not transparent.

Polyethylene terephthalate is a part of the Polyesters family, it is a thermoplastic resin suitable for food contact and easily recyclable; our filament is made of natural amorphal transparent material or in five other colours, opaque and transparent. The PETG is easy to adhere to the plate and with an open press room; The advantage of PETG is that it is a material with mechanical characteristics higher than the ABS with the addition of elasticity; Easy to be printed as the PLA (does not require hot room), is odourless and does not absorb water. It is a co-polyester so it is important to print with the exact temperatures to have the aesthetic effect of this material. Excellent characteristics of mechanical resistance at high temperatures and resistance to acids.

Colour: Black (RAL 9005)
Net weight: ± 1 Kg
Material: PETG-polyethylene terephthalate or Copolyester
Transparence: Matte
Diameter: 1.75 mm
Roundness tolerance: ± 2%
Material Quality: 100% original resin.
Density: 1.23 g/cm3 (21.5 ° C).
Resistance: 6 KJ/m2.
Spool diameter (up to 1 kg): 200 x 50 mm.
Dim. Inner spool tube: 90 mm.
Packaging: Vacuum-packed with silica gel and cardboard box.
Printing surface temperature: 40-60 ° C
Extrusion temperature: 215-225 °c
No or minimal ventilation
Printing surface material: glass, metal, fiberglass, Kapton tape
Extrusion Speed: 30 mm/S – 50 mm/s
Recommended printing speed 40 mm/s, on all tractor drivers
Recommended printing temperature of 215 ° C
Extruder with good quality PTFE or metal, with or without Bowden.

Printing speed (recommended): 40 – 100 mm/s. *
Easy PRINTING: ★ ★ ★ ★ ★
* Printing temperatures may vary depending on the printer used.

Additional information

Weight 1300 g
Dimensions 240 × 220 × 120 mm