3d filament in PETG-3dfilum-transparent blue.
3d filament in 3dfilum PETG. Polyethylene terephthalate is a part of the Polyesters family, it is a thermoplastic resin suitable for food contact and easily recyclable; Our PETG 3d filament is made of natural transparent amorphal material or in five other colours, opaque and transparent.
The 3d filament in PETG is easy to adhere to the plate and with open printing chamber; The advantage of PETG is that it is a material with mechanical characteristics higher than theABS with the addition of elasticity; Easy to be printed as the PLA (Does not require hot printing chamber), is odourless and does not absorb water. It is a co-polyester so it is important to print with the exact temperatures to have the aesthetic effect of this material. Excellent characteristics of mechanical resistance at medium high temperatures and resistance to acids.
Used with the following printers: Zortrax, Flashforge, MakerBot, Sharebot, Mini & Maxi Createbot, Wasp, Prusa i3, Hephestone, Mingda and more…
Colour: transparent Blue (RAL ± 5015t)
Net weight: ± 1 Kg
Material: PETG-polyethylene terephthalate or Copolyester
Diameter: 1.75 mm
Roundness tolerance: ± 2%
Material Quality: 100% original resin.
Density: 1.23 g/cm3 (21.5 ° C).
Resistance: 6 KJ/m2.
Spool diameter (up to 1 kg): 200 x 50 mm.
Dim. Inner spool tube: 90 mm.
Packaging: Vacuum-packed with silica gel and cardboard box.
Printing surface temperature: 40-60 ° C
Extrusion temperature: 215-225 °c
No or minimal ventilation
Printing surface material: glass, metal, fiberglass, Kapton tape
Extrusion Speed: 30 mm/S – 50 mm/s
Recommended printing speed 40 mm/s, on all tractor drivers
Recommended printing temperature of 215 ° C
Extruder with good quality PTFE or metal, with or without Bowden.
Printing speed (recommended): 40 – 100 mm/s. *
Easy PRINTING: ★ ★ ★ ★ ★
* Printing temperatures may vary depending on the printer used.