PLApower 3Dfilum Red.
Hybrid Polylactic Acid Material 80-100 natural – 0-20 addition of acrylic polymers; it has been studied and tested in the laboratory to have exceptional aesthetic and mechanical characteristics – PLApower is comparable, as mechanical resistance, to an ABS, but retains the characteristic ease of printing of the PLA. Excellent sealing and fusion between layers, low withdrawal and absence of deformation on the artifacts when printed at ideal temperatures; does not release ABS-own odors. The manufactured artifact is much more durable than a common PLA and does not break if prone to flexion, it is more resistant to high temperatures than the PLAtech. During printing the filament stretches evenly and does not form burrs, has a good adherence to the print plate.
Color: Red (RAL 3000)
Net weight: ± 1 Kg
Material: PLA – Natural Polylactic Acid 90 – 10 addition of thermoplastic materials
Diameter: 1.75 mm
Roundness tolerance: ± 5%
Basic material quality: 90 Original Resin
Density: 1.28 g/cm3 (21.5 degrees C).
Resistance: 4.5 kJ/m2.
Spool diameter (up to 1 kg): 200 x 50 mm.
Dim. Inner spool tube: 90 mm.
Packaging: Vacuum-packed with silica gel and cardboard box.
Extrusion temperature: 220 degrees – 230 degrees C.
Temperature of the pot: 50 degrees – 60 degrees C.
Plenty of ventilation on the layers when printing.
Printing surface material: glass, metal, fiberglass, Kapton tape etc.
Recommended print temperature of 226 degrees Celsius to 50mm/sec.
Extruder with PTFE with or without bowden.
Printing speed (recommended): 40 – 80 mm/s.
Easy PRINTING: ★ ★ ★ ★ ★
Print temperatures may vary depending on the printer you are using and the type of filament color
Comprehensive technical specific links of the material: https://www.3dfilum.it/3dfilum-filaments-technical-specifications/